Case Study : Steel Ladder Deck Bridge Design

MIDAS Academy : How I Design Bridge 25th June, 2020, 10:00 -11:00 AM (London)
25th June, 2020, 11:00 - 12:00 PM (Praha)
25th June, 2020, 5:00 - 6:00 PM (Singapore)
25th June, 2020, 7:00 - 8:00 PM (Sydney)

Click here to see it in your local time
EVENT CLOSED Register now
Case Study : Steel Ladder Deck Bridge Design MIDAS Academy : How I Design Bridge 25th June, 2020, 10:00 -11:00 AM (London)
25th June, 2020, 11:00 - 12:00 PM (Praha)
25th June, 2020, 5:00 - 6:00 PM (Singapore)
25th June, 2020, 7:00 - 8:00 PM (Sydney)

Click here to see it in your local time
EVENT CLOSED Register now
OVERVIEW

Illustrating on a case study of the continuous steel composite ladder deck bridge, the webinar will highlight major factors to consider in the design of this type of bridge, such as shear lag and buckling effects. It will provide recommendations on suitability and use of different model types. Since many of ladder deck bridges are constructed using the push launch method, special considerations for the construction sequence will be discussed.

 

This session is recommended for bridge engineer who want to learn fundamentals of time history analysis in detail.

AGENDA
  • 5 mins

    Introduction

  • 45 mins

    Case Study : Steel Ladder Deck Bridge Design

    Workflow overview of the ladder deck steel bridge design. Discussion of main considerations and steps necessary for an efficient modelling and analysis.

  • 10 mins

    Question & Answer

  • 12:00 - 14:00 SESSION 2-1

    3D Excavation and Piled-Raft Foundation

    [Part 1] 3D Geometry modeling and Meshing
    [Part 2] Analysis control and checking results.

  • 12:00 - 14:00 SESSION 2-1

    3D Excavation and Piled-Raft Foundation

    [Part 1] 3D Geometry modeling and Meshing
    [Part 2] Analysis control and checking results.

  • 12:00 - 14:00 SESSION 2-1

    3D Excavation and Piled-Raft Foundation

    [Part 1] 3D Geometry modeling and Meshing
    [Part 2] Analysis control and checking results.

  • 12:00 - 14:00 SESSION 2-1

    3D Excavation and Piled-Raft Foundation

    [Part 1] 3D Geometry modeling and Meshing
    [Part 2] Analysis control and checking results.

  • 12:00 - 14:00 SESSION 2-1

    3D Excavation and Piled-Raft Foundation

    [Part 1] 3D Geometry modeling and Meshing
    [Part 2] Analysis control and checking results.

  • 12:00 - 14:00 SESSION 2-1

    3D Excavation and Piled-Raft Foundation

    [Part 1] 3D Geometry modeling and Meshing
    [Part 2] Analysis control and checking results.

KEY POINTS

Key Point 1:Purpose of Different Model Types for Steel Bridge Design

More than one type of structural model may be necessary for the steel bridge design. The speaker will talk about the purpose of different modelling methods and how those models can be created.

 

Key Point 2:Deck Slab Considerations

The presentation will discuss whether and how to include effects of shear lag in concrete deck as well as cracked concrete over bridge supports.

 

Key Point 3:Special Considerations for Push Launch Construction

Stability of the bare steel structure during construction may be a deciding factor in the design. The webinar will provide guidance in this important aspect of the bridge design.

SPEAKER
  • Martin Bosak

    Senior Engineer | Barry Transportation, Ireland

    - Over 15 Years Experience in Structural Bridge Design
    - Involved in various infrastructure projects in Ireland, UK, Czech Republic and Slovakia
  • Martin Bosak

    Senior Engineer | Barry Transportation, Ireland

    - Over 15 Years Experience in Structural Bridge Design
    - Involved in various infrastructure projects in Ireland, UK, Czech Republic and Slovakia
Read all
REGISTER The event is done.
Thank you for your interest.
REGISTER You are registered.

Thanks for registration.
The registration confirmation email has been sent to your email

REGISTER You are registered.

Thanks for registration.
Please check the confirmation email from GoToWebinar for joining the session.

INFORMATION
Event
Case Study : Steel Ladder Deck Bridge Design
Date
25th June, 2020, 10:00 -11:00 AM (London)
25th June, 2020, 11:00 - 12:00 PM (Praha)
25th June, 2020, 5:00 - 6:00 PM (Singapore)
25th June, 2020, 7:00 - 8:00 PM (Sydney)
Date & Location
Who should attend
GTS NX Training Workshop in Kuala Lumpur
Date & Location
Document
Notice

1. Participation of this seminar is FREE.
2. We recommend you to register immediately since the number of seats are limited.
3. If you come early to the seminar place, you can enjoy the welcome snack and coffee/tea.
4. For effective training session, we recommend you to bring your personnel laptop computer in order to get the hands-on experience of MIDAS software.
5. Training license and installation guide will be provided to all registrants before the seminar in advance.